|
SPC "Edem" - P.O.Box
12, Kyiv-8, 01008
Tel.: (+38 044) 271 2046 Òel./Fax: (+38 044) 522 8905; 253 7116 E-mail : edem@edem.org.ua |
PROJECTS
The
Concept of the Social-Ecological Project titled "Pure Water for
Human Health" was developed
in1997. The Project is targeted at making our fellow-country people
ecologically conscious through convincing them in the advantages
of Pure Water and importing the unique storage-type appliances for portable water afterpurification. The above - mentioned appliances
are known as water purifiers under trademarks "Coolmart" and
"NEOS".
More than four thousand of our fellow citizens use water from these water purifiers.
More than four thousand of our fellow citizens use water from these water purifiers.
This technological project
was launched in 1996 to develop the principally new dampener (muffler) for internal combustion engines. The
newly-developed dampener represents sequentially
welded tubes of different length and diameter.
N.A.
Efimov, an inventor from Pryluky, Ukraine, is the father of this
technical idea implemented in this principally new resonance
dampener.
The automotive dampener design was patented in Ukraine by SPC "Edem" in 2000 as "Resonance Dampener of Noise".
The automotive dampener design was patented in Ukraine by SPC "Edem" in 2000 as "Resonance Dampener of Noise".
The
studies on properties of bischofite - a liquid mineral born in the
ancient Perm Sea salts crystallization process, were initiated in
2000 with the purpose of its usage in different areas of production,
construction and new materials creation.
In
Ukraine bischofite is extracted by means of a water jet method in the
form of highly concentrated
magnesium chloride brine.
Under such a title in 2000 the new ecological project was launched. The
project is targeted at development of the "recycling" technology
to create new construction materials through processing and reusage of
construction, industrial and domestic waste on basis of magnesian
astringents.
Under such a title, the implementation program of the technology
developed and patented in Ukraine and Russia in 1994ã. by our partner,
Shostak V.V.was started
The technology ensures milling of materials of any hardness
(from wheat grain up to diamond). The materials can be ground to factions
of 0,15 micron and below in size.
The milling is done in a whirlpool mill, in which any gas or pressed air
may be given under pressure from 3 kgs/sm2
up to 6 kgs/sm2.
Under such a title a new type of a chisel tool, the chisel chain tool
was created. It provides super deep and highly productive boring (more
than 2 km) of wells from 215mm to 600mm in diameter.
The
construction of the chisel chain tool is licensed in Ukraine in name of
SPC "Edem" in 2000.
